Unit 8 Performance Products Cooling Ancilliaries

[ Up ] [ Catalog ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout ] [ Contact Us ]

Online Catalogue > Honda > Civic Type R EP3 > Engine Components > Cooling > Water > Cooling Ancilliaries

	Skunk 2 High Pressure Rad Cap Honda Price: £22.13 (Excluding: VAT at 15%)


	Buddy Club Racing Type B Rad Cap High pressure rad cap for the EP3 Price: £18.00 (Excluding: VAT at 15%)


	Mugen High Pressure Radiator Cap This radiator cap is a high-pressure type that increases the pressure inside the radiator, thus raising the coolant boiling point and increasing cooling efficiency. The open valve pressure is 1.3kg/cm² compared to the normal 1.1kg/cm². It demonstrates its power under high-load situations such as circuit driving. Price: £25.52 (Excluding: VAT at 15%)


	Mugen Fan Switch EP3 Activates cooling fan at 80°C instead of the stock 93°C. Requires use of Mugen low-temp thermostat. Price: £33.18 (Excluding: VAT at 15%)


	Mugen Low Temperature Thermostat EP3 This thermostat has the operating temperature set lower than normal. It prevents engine power loss by minimizing rapid water-temperature rises under harsh conditions such as during circuit driving. The use of a flow-control-type valve prevents hunting, thereby achieving rapid stabilization of the water temperature (the engine warms up within a short period). Operating temperature: 68°C (STD.: 76~8... [more] Price: £57.86 (Excluding: VAT at 15%)


	Spoon High Pressure Radiator Hoses EP3 When a tuned engine is used hard, the engine rotation causes the water pump revs to go up and down violently, causing a normal radiator hose to collapse under the suction variations of the water pump. Since there is a large amount of water moved (especially when a large-sized radiator is fitted) the tendancy of the hoses to collapse worsens. Moreover, the phenomenon "to shut" is a problem in high air pressure such as when the car is running at high speed at low altitude. Once "shut" the hose will not return quickly to shape and volume, however the engine will then overheat immediately. With the Spoon hoses, we manufactured the deformation-resistant hoses to also look good! The material used is an SEP material (Silicon ethylene propylene rubber) many other performance hoses use EP material (Ethylene propylene). The advantages of Spoon SEP hoses are that they have better heat resistance, proof against the cold, are long term season-proof, and have high temperature vacuum stability. For example: heat resistance EP material -- 120°C SEP material -- 160°C. Price: £220.00 (Excluding: VAT at 15%)


	Spoon Radiator Stays EP3 Larger aftermarket radiators sometimes are not compatible with standard radiator stays. The Spoon radiator stay can be used with most radiators and weighs 12g versus 52g standard. Available in white (aluminum) and black. Price each. Price: £15.95 (Excluding: VAT at 15%)
	Colour

	Spoon High Pressure Radiator Cap The radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply, accordingly, even when the temperature of the coolant water exceeds 100°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved. Price: £18.22 (Excluding: VAT at 15%)
	Type

	Cusco Type B High Pressure Radiator Cap Cusco High Pressure Radiator Cap Raises the boiling point for better cooling efficiency, preventing over heating. Fortified main pressure valve spring and silicon packing are used to raise the pressure inside the radiator for a higher boiling point. The coolant will not boil easily, prevents air bubbles in the block and radiator core with improved heat transfer. Cusco's high pressure radiator caps works at 1.3kg/cm2 at zero atmospheric pressure. In practice though, the atmospheric pressure of the road surface (approximately 1.0kg/cm2) is added and the pressure is 2.3kg/cm2. Price: £21.27 (Excluding: VAT at 15%)